Non-woven tapes

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

Use our durable, flexible and low-stretch Scotch-Brite™ abrasive belt for cleaning, finishing and light deburring. Our abrasive belts enable effective cutting without damaging materials and are ideal for use on contoured and uneven surfaces. The abrasive belts deliver the best performance on steel, stainless steel, carbon steel, titanium and nickel alloys, and can be used on aluminium, copper, brass and soft non-ferrous metals. They are available in numerous variants to suit a wide range of different applications. Low-stretch Scotch-Brite abrasive belts for surface finishing are made from aluminium oxide and silicon carbide minerals. They are available in numerous combinations, including: medium aluminium oxide (A MED), very fine aluminium oxide (A VFN), coarse aluminium oxide (A CRS), medium silicon carbide (S MED), super-fine silicon carbide (S SFN) and very fine silicon carbide (S VFN). Aluminium oxide breaks down more gently than silicon carbide but lasts longer. It is ideal when only light sanding marks are required, such as on softer metals, or when grooving or undercutting are the primary concerns. For a coarser and more aggressive cut, silicon carbide is a good choice. Our finer grits produce finer finishing results, whilst medium or coarse grits deliver coarser finishing results. Our abrasive belts have been developed for applications with low belt stretch, where a standard fabric belt stretches on the machine or where lower adaptability is required. They are tear-resistant, resistant to sharp edges and useful across a wide range of industries, from transport to metalworking. Choose from a range of sanding belt types, from file or narrow belts, hand sanding belts and sanding belt sleeves to wide and flat finishing sanding belts. Tools, surface area, contours and dimensions of the workpiece – all these factors must be taken into account when selecting an abrasive belt. Narrow abrasive belts are typically used in applications with bench-top machines and grinding blocks. Abrasive belt sleeves are fitted around extension discs and used for finishing large, stationary equipment components. Open-weave Scotch-Brite industrial abrasives are unique and offer many advantages. The non-woven technology combines fibre bundles, synthetic resin and abrasive minerals into a thick, open-weave fabric. The fibres are elastic and adapt effectively to contours, removing unwanted burrs, press marks and dirt without altering the shape of the workpiece. This results in less rework and greater productivity. Openings in the fleece allow abrasive debris to be carried away, preventing the material from clogging. The fibres in the fleece wear down continuously during use, exposing fresh abrasive grains. This achieves exceptional consistency, outstanding cutting performance and a very long service life. Scotch-Brite products are designed to increase productivity and simplify work processes. From aesthetic finishing to weld seam blending, deburring and more, the discs work faster and deliver consistent results.

Scotch-Brite™ Feinschleifbänder werden hergestellt, indem Vliesstoff mit einer X-Gewebeunterlage aus Baumwolle verbunden werden. Unsere Bänder sind ideal für die Anwendung mit Bandschleifmaschinen. Verwenden Sie das Scotch-Brite™ Feinschleifband mit Bandschleifmaschinen. Unsere Bänder werden hergestellt, indem Vliesstoff mit einer X-Gewebeunterlage aus Baumwolle verbunden werden. Flexibilität, Verformbarkeit und einheitliche, gleichmäßige Oberflächengüte.

Scotch-Brite™ Feinschleifbänder werden hergestellt, indem Vliesstoff mit einer X-Gewebeunterlage aus Baumwolle verbunden werden. Unsere Bänder sind ideal für die Anwendung mit Bandschleifmaschinen. Verwenden Sie das Scotch-Brite™ Feinschleifband mit Bandschleifmaschinen. Unsere Bänder werden hergestellt, indem Vliesstoff mit einer X-Gewebeunterlage aus Baumwolle verbunden werden. Flexibilität, Verformbarkeit und einheitliche, gleichmäßige Oberflächengüte.

This non-woven belt is ideal for deburring, matting and finishing all stainless steel and steel components, as well as for applying a defined finish even to large surfaces. In addition to reducing surface roughness, this abrasive tool is also used for various applications on wood and plastics. Due to its low stretch, the Scotch-Brite™ SC-BL non-woven belt is particularly suitable for applications involving heavy-duty use. New abrasive grains are continuously released without undercutting the workpiece, whilst maintaining critical tolerances. The uniform distribution of abrasive grains ensures a consistent, reproducible surface finish.

Use our durable, flexible, low-stretch Scotch-Brite™ abrasive belt for cleaning, finishing and light deburring. Our abrasive belts enable effective cutting without damaging materials and are ideal for use on contoured and uneven surfaces. The abrasive belts deliver the best performance on steel, stainless steel, carbon steel, titanium and nickel alloys, and can be used on aluminium, copper, brass and soft non-ferrous metals. They are available in numerous variants to suit a wide range of different applications. Low-stretch Scotch-Brite abrasive belts for surface finishing are made from aluminium oxide and silicon carbide minerals. They are available in numerous combinations, including: medium aluminium oxide (A MED), very fine aluminium oxide (A VFN), coarse aluminium oxide (A CRS), medium silicon carbide (S MED), super-fine silicon carbide (S SFN) and very fine silicon carbide (S VFN). Aluminium oxide breaks down more gently than silicon carbide but lasts longer. It is ideal when only light grinding marks are required, such as on softer metals, or when grooving or undercutting are the primary concerns. For a coarser and more aggressive cut, silicon carbide is a good choice. Our finer grits produce finer finishing results, whilst medium or coarse grits deliver coarser finishing results. Our abrasive belts have been developed for applications with low belt stretch, where a standard cloth belt stretches on the machine or where lower flexibility is required. They are tear-resistant, resistant to sharp edges and useful across a wide range of industries, from transport to metalworking. Choose from a range of sanding belt types, from file or narrow belts, hand sanding belts and sanding belt sleeves to wide and flat finishing belts. Tools, surface area, contours and dimensions of the workpiece – all these factors must be taken into account when selecting an abrasive belt. Narrow abrasive belts are typically used in applications with bench-top machines and grinding blocks. Abrasive belt sleeves are fitted around extension discs and used for finishing large, stationary equipment components. Open-weave Scotch-Brite industrial abrasives are unique and offer many advantages. The non-woven technology combines fibre bundles, synthetic resin and abrasive minerals into a thick, open-weave fabric. The fibres are elastic and adapt effectively to contours, removing unwanted burrs, press marks and dirt without altering the shape of the workpiece. This results in less rework and greater productivity. Openings in the fleece allow abrasive debris to be carried away, preventing the material from clogging. The fibres in the fleece wear down continuously during use, exposing fresh abrasive grains. This achieves exceptional consistency, outstanding cutting performance and a very long service life. Scotch-Brite products are designed to increase productivity and simplify work processes. From aesthetic finishing to weld seam blending, deburring and more, the discs work faster and deliver consistent results.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

Use our durable, flexible, low-stretch Scotch-Brite™ abrasive belt for cleaning, finishing and light deburring. Our abrasive belts enable effective cutting without damaging materials and are ideal for use on contoured and uneven surfaces. The abrasive belts deliver the best performance on steel, stainless steel, carbon steel, titanium and nickel alloys, and can be used on aluminium, copper, brass and soft non-ferrous metals. They are available in numerous variants to suit a wide range of different applications. Low-stretch Scotch-Brite abrasive belts for surface finishing are made from aluminium oxide and silicon carbide minerals. They are available in numerous combinations, including: medium aluminium oxide (A MED), very fine aluminium oxide (A VFN), coarse aluminium oxide (A CRS), medium silicon carbide (S MED), super-fine silicon carbide (S SFN) and very fine silicon carbide (S VFN). Aluminium oxide breaks down more gently than silicon carbide but lasts longer. It is ideal when only light grinding marks are required, such as on softer metals, or when grooving or undercutting are the primary concerns. For a coarser and more aggressive cut, silicon carbide is a good choice. Our finer grits produce finer finishing results, whilst medium or coarse grits deliver coarser finishing results. Our abrasive belts have been developed for applications with low belt stretch, where a standard cloth belt stretches on the machine or where lower flexibility is required. They are tear-resistant, resistant to sharp edges and useful across a wide range of industries, from transport to metalworking. Choose from a range of sanding belt types, from file or narrow belts, hand sanding belts and sanding belt sleeves to wide and flat finishing belts. Tools, surface area, contours and dimensions of the workpiece – all these factors must be taken into account when selecting an abrasive belt. Narrow abrasive belts are typically used in applications with bench-top machines and grinding blocks. Abrasive belt sleeves are fitted around extension discs and used for finishing large, stationary equipment components. Open-weave Scotch-Brite industrial abrasives are unique and offer many advantages. The non-woven technology combines fibre bundles, synthetic resin and abrasive minerals into a thick, open-weave fabric. The fibres are elastic and adapt effectively to contours, removing unwanted burrs, press marks and dirt without altering the shape of the workpiece. This results in less rework and greater productivity. Openings in the fleece allow abrasive debris to be carried away, preventing the material from clogging. The fibres in the fleece wear down continuously during use, exposing fresh abrasive grains. This achieves exceptional consistency, outstanding cutting performance and a very long service life. Scotch-Brite products are designed to increase productivity and simplify work processes. From aesthetic finishing to weld seam blending, deburring and more, the discs work faster and deliver consistent results.

Use our durable, flexible, low-stretch Scotch-Brite™ abrasive belt for cleaning, finishing and light deburring. Our abrasive belts enable effective cutting without damaging materials and are ideal for use on contoured and uneven surfaces. The abrasive belts deliver the best performance on steel, stainless steel, carbon steel, titanium and nickel alloys, and can be used on aluminium, copper, brass and soft non-ferrous metals. They are available in numerous variants to suit a wide range of different applications. Low-stretch Scotch-Brite abrasive belts for surface finishing are made from aluminium oxide and silicon carbide minerals. They are available in numerous combinations, including: medium aluminium oxide (A MED), very fine aluminium oxide (A VFN), coarse aluminium oxide (A CRS), medium silicon carbide (S MED), super-fine silicon carbide (S SFN) and very fine silicon carbide (S VFN). Aluminium oxide breaks down more gently than silicon carbide but lasts longer. It is ideal when only light grinding marks are required, such as on softer metals, or when grooving or undercutting are the primary concerns. For a coarser and more aggressive cut, silicon carbide is a good choice. Our finer grits produce finer finishing results, whilst medium or coarse grits deliver coarser finishing results. Our abrasive belts have been developed for applications with low belt stretch, where a standard cloth belt stretches on the machine or where lower flexibility is required. They are tear-resistant, resistant to sharp edges and useful across a wide range of industries, from transport to metalworking. Choose from a range of sanding belt types, from file or narrow belts, hand sanding belts and sanding belt sleeves to wide and flat finishing belts. Tools, surface area, contours and dimensions of the workpiece – all these factors must be taken into account when selecting an abrasive belt. Narrow abrasive belts are typically used in applications with bench-top machines and grinding blocks. Abrasive belt sleeves are fitted around extension discs and used for finishing large, stationary equipment components. Open-weave Scotch-Brite industrial abrasives are unique and offer many advantages. The non-woven technology combines fibre bundles, synthetic resin and abrasive minerals into a thick, open-weave fabric. The fibres are elastic and adapt effectively to contours, removing unwanted burrs, press marks and dirt without altering the shape of the workpiece. This results in less rework and greater productivity. Openings in the fleece allow abrasive debris to be carried away, preventing the material from clogging. The fibres in the fleece wear down continuously during use, exposing fresh abrasive grains. This achieves exceptional consistency, outstanding cutting performance and a very long service life. Scotch-Brite products are designed to increase productivity and simplify work processes. From aesthetic finishing to weld seam blending, deburring and more, the discs work faster and deliver consistent results.

This non-woven belt is ideal for deburring, matting and finishing all stainless steel and steel components, as well as for applying a defined finish even to large surfaces. In addition to reducing surface roughness, this abrasive tool is also used for various applications on wood and plastics. Due to its low stretch, the Scotch-Brite™ SC-BL non-woven belt is particularly suitable for applications involving heavy-duty use. New abrasive grains are continuously released without undercutting the workpiece, whilst maintaining critical tolerances. The uniform distribution of abrasive grains ensures a consistent, reproducible surface finish.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

The Scotch-Brite™ non-woven belt on a film backing is designed for surface finishing and can be used for cleaning, finishing, blending and deburring. These non-stretch belts are ideal for use with clamping plates or where low friction is required. The film backing gives our belts high flexibility and reduces friction. The non-woven material, combined with the extremely sharp-edged aluminium oxide abrasive grain, offers a high stock removal rate and a long service life. These abrasive belts are ideal for achieving a good finish or removing burrs without gouging or undercutting the workpiece.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

The tear-resistant, flexible design of this fibre fleece product is characterised by exceptional edge stability and delivers excellent results on tightly rounded shapes. The low-stretch backing is particularly suited to heavy-duty applications and is ideal for use as a filing belt, amongst other things. The even distribution of the abrasive grain guarantees an extended service life and consistent results at all times. Thanks to the fibre fleece technology, a uniform, reproducible surface finish is achieved without altering the geometry of the workpiece. Working speeds of up to 30 m/s are possible, and it is also very well suited for finishing work following preliminary grinding with 3M™ Cubitron™ II abrasives.

This non-woven belt is ideal for deburring, matting and finishing all stainless steel and steel components, as well as for applying a defined finish even to large surfaces. In addition to reducing surface roughness, this abrasive tool is also used for various applications on wood and plastics. Due to its low stretch, the Scotch-Brite™ SC-BL non-woven belt is particularly suitable for applications involving heavy-duty use. New abrasive grains are continuously released without undercutting the workpiece, whilst maintaining critical tolerances. The uniform distribution of abrasive grains ensures a consistent, reproducible surface finish.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.

Thanks to the open structure of the fleece and the resulting high flexibility, the belt follows contours and surfaces, adapting to the workpiece. New abrasive grains are continuously brought into contact with the surface without undercutting the workpiece, whilst maintaining critical tolerances. The homogeneous distribution of the abrasive grains ensures a uniform, reproducible surface finish. Thanks to a built-in lubricant, these fleece belts are ideal for dry grinding, but can also be used with all standard grinding additives.