Flap discs

Die 3M™ Cubitron™ II Fächerscheibe 967A ist für herausragende Schleifleistungen bei Anwendungen mit niedrigem bis mittlerem Anpressdruck entwickelt. Mit ihrer einzigartigen Konstruktion und dem 3M präzisionsgeformten Schleifkorn bietet sie eine beeindruckende Abtragsrate und eine verlängerte Lebensdauer. Diese Scheibe ist ideal für flächige Bereiche und Außenkanten geeignet, wo es auf Oberflächenqualität und Kantenstabilität ankommt. Dank des integrierten Schleifhilfsmittels wird die Schleiftemperatur reduziert, was Anlauffarben und Oxidation des Metalls minimiert sowie hitzebedingte Spannungsrisse verringert. Die Fächerscheibe ermöglicht das Schleifen und Verblenden in einem Schritt und kann häufig Fiber- und Schruppscheiben ersetzen. Ihre widerstandsfähige, schwere Y-Viskoseunterlage sorgt für eine kontrollierte, gleichmäßige Abnutzung, sodass die Scheibe bei mittleren bis hohen Anpressdrücken voll ausgelastet werden kann. Die 3M Cubitron II Fächerscheibe 967A nutzt das präzisionsgeformte Schleifkorn, das durch seine dreieckige Form kontinuierlich scharfe Spitzen bildet und somit effizient schneidet. Dies ermöglicht ein extrem schnelles Schneiden und eine hohe Oberflächenqualität bei weniger Anstrengung. Die überlappenden Lamellen der Fächerscheibe sorgen für einen gleichmäßigen und schnellen Schliff, während die Polsterung der Lamellen ein hochwertiges Finish erzeugt, das eine Stufe feiner ist als das einer Fiberscheibe gleicher Qualität. Die 3M Cubitron II Fächerscheibe 967 A bietet eine hervorragende Produktivitätssteigerung, indem sie Schleifen und Finishen in einem einzigen Schritt erledigt. Sie stellt eine kosteneffiziente und zeitsparende Lösung dar, besonders wenn es auf Oberflächenqualität und Einschnittfestigkeit ankommt. Die Scheibe ist für den Einsatz mit Winkelschleifern konzipiert und bietet eine ausgezeichnete Leistung bei der Bearbeitung einer Vielzahl von Metallen.

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The ceramic grain, precision-moulded by 3M, plays a significant role in the performance of this disc. The tips of the triangular grains break off during the grinding process, ensuring that sharp cutting edges are always maintained. This ensures that the surface of the material is continuously machined cleanly. The result is a fast, cool grind and an extended service life for the abrasive.

The 3M™ Cubitron™ II flap disc, featuring the precision-shaped abrasive grain we have developed, offers higher removal rates, longer service life and better surface quality for a range of demanding tasks in automotive repair. This sanding disc combines our high-performance abrasive grain with a flexible, overlapping flap design that allows for sanding and blending in a single step. This means you need fewer discs for the same job. The triangular-shaped abrasive grain enables up to 30% higher removal rates than conventional premium abrasives. Paint or rust can thus be easily removed down to the bare metal, whilst still achieving a consistent surface finish.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The 3M™ Cubitron™ 3 Fan-Cut Abrasive Disc 1169F is one of our most powerful abrasive discs and is characterised by its versatility and high quality. Thanks to the redesigned 3M precision-shaped grain, which now features curved sides, it offers a longer service life and higher stock removal than any other shaped grain and any other conventional aluminium oxide or zirconia flap disc. It is easy to use and has a long service life in daily use. This unbeatable combination of performance and benefits can boost productivity and reduce your expenditure on abrasives. The high-performance 3M™ Cubitron™ 3 Fan Disc 1169F is durable, versatile and offers all the benefits you would expect from a fan disc, such as adaptability, ease of use and a reduced risk of grout damage. The 3M™ Cubitron™ 3 Flap Disc 1169F features 3M precision-shaped grit (now redesigned with curved sides) and a durable polyester backing. On structural steel, it removes up to 49% more material compared to the 3M™ Cubitron™ II 40+ flap disc 969F and up to 66% more compared to the 3M™ 40+ flap disc 769F. It is designed for medium to high-pressure applications such as chamfering, weld seam grinding, deburring, and work on edges and contours. It also ensures a high-quality finish, making it the first choice for tasks such as blending or surface preparation. The 3M™ Cubitron™ 3 Fan-Shaped Abrasive Disc 1169F features our new patented 3M precision-shaped grain, which has now been redesigned to have curved sides. This continuously breaks into sharp-edged structures that cut cleanly through the metal, rather than ploughing through the surfaces like conventional abrasives. Thanks to this fracturing action, our 3M™ Cubitron™ 3 Fan-Cut Disc 1169F offers an extremely long service life and maintains a high removal rate throughout its entire lifespan. Applications • Grinding weld seams • Light grinding • Chamfering • Deburring • Blending • Finishing • Surface preparation • Scale removal • Weld spatter removal • Machining of edges and contours. Expert tip: In many cases, you can use the 3M™ Cubitron™ 3 Fan Disc 1169F to sand or finish in a single step without having to change the abrasive. The reason for this is that, unlike a fibre disc of the same grit size, the 1169F produces a finish that is one grit finer under normal conditions. Although the fibre disc grinds faster, this fan-shaped grinding disc eliminates the need for additional work steps and disc changes, saving you time.

The ceramic grain, precision-moulded by 3M, plays a significant role in the performance of this disc. The tips of the triangular grains break off during the grinding process, ensuring that sharp cutting edges are always maintained. This ensures that the surface of the material is continuously machined cleanly. The result is a fast, cool grind and an extended service life for the abrasive.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.

The 3M™ Cubitron™ 3 Fan-Cut Abrasive Disc 1169F is one of our most powerful abrasive discs and is characterised by its versatility and high quality. Thanks to the redesigned 3M precision-shaped grain, which now features curved sides, it offers a longer service life and higher stock removal than any other shaped grain and any other conventional aluminium oxide or zirconia flap disc. It is easy to use and has a long service life in daily use. This unbeatable combination of performance and benefits can boost productivity and reduce your expenditure on abrasives. The high-performance 3M™ Cubitron™ 3 Fan Disc 1169F is durable, versatile and offers all the benefits you would expect from a fan disc, such as adaptability, ease of use and a reduced risk of grout damage. The 3M™ Cubitron™ 3 Flap Disc 1169F features 3M precision-shaped grit (now redesigned with curved sides) and a durable polyester backing. On structural steel, it removes up to 49% more material compared to the 3M™ Cubitron™ II 40+ flap disc 969F and up to 66% more compared to the 3M™ 40+ flap disc 769F. It is designed for medium to high-pressure applications such as chamfering, weld seam grinding, deburring, and work on edges and contours. It also ensures a high-quality finish, making it the first choice for tasks such as blending or surface preparation. The 3M™ Cubitron™ 3 Fan-Shaped Abrasive Disc 1169F features our new patented 3M precision-shaped grain, which has now been redesigned to have curved sides. This continuously breaks into sharp-edged structures that cut cleanly through the metal, rather than ploughing through the surfaces like conventional abrasives. Thanks to this fracturing action, our 3M™ Cubitron™ 3 Fan-Cut Disc 1169F offers an extremely long service life and maintains a high removal rate throughout its entire lifespan. Applications • Grinding weld seams • Light grinding • Chamfering • Deburring • Blending • Finishing • Surface preparation • Scale removal • Weld spatter removal • Machining of edges and contours. Expert tip: In many cases, you can use the 3M™ Cubitron™ 3 Fan Disc 1169F to sand or finish in a single step without having to change the abrasive. The reason for this is that, unlike a fibre disc of the same grit size, the 1169F produces a finish that is one grit finer under normal conditions. Although the fibre disc grinds faster, this fan-shaped grinding disc eliminates the need for additional work steps and disc changes, saving you time.

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The 3M™ Cubitron™ 3 Fan-Cut Abrasive Disc 1169F is one of our most powerful abrasive discs and is characterised by its versatility and high quality. Thanks to the redesigned 3M precision-shaped grain, which now features curved sides, it offers a longer service life and higher stock removal than any other shaped grain and any other conventional aluminium oxide or zirconia flap disc. It is easy to use and has a long service life in daily use. This unbeatable combination of performance and benefits can boost productivity and reduce your expenditure on abrasives. The high-performance 3M™ Cubitron™ 3 Fan Disc 1169F is durable, versatile and offers all the benefits you would expect from a fan disc, such as adaptability, ease of use and a reduced risk of grout damage. The 3M™ Cubitron™ 3 Flap Disc 1169F features 3M precision-shaped grit (now redesigned with curved sides) and a durable polyester backing. On structural steel, it removes up to 49% more material compared to the 3M™ Cubitron™ II 40+ flap disc 969F and up to 66% more compared to the 3M™ 40+ flap disc 769F. It is designed for medium to high-pressure applications such as chamfering, weld seam grinding, deburring, and work on edges and contours. It also ensures a high-quality finish, making it the first choice for tasks such as blending or surface preparation. The 3M™ Cubitron™ 3 Fan-Shaped Abrasive Disc 1169F features our new patented 3M precision-shaped grain, which has now been redesigned to have curved sides. This continuously breaks into sharp-edged structures that cut cleanly through the metal, rather than ploughing through the surfaces like conventional abrasives. Thanks to this fracturing action, our 3M™ Cubitron™ 3 Fan-Cut Disc 1169F offers an extremely long service life and maintains a high removal rate throughout its entire lifespan. Applications • Grinding weld seams • Light grinding • Chamfering • Deburring • Blending • Finishing • Surface preparation • Scale removal • Weld spatter removal • Machining of edges and contours. Expert tip: In many cases, you can use the 3M™ Cubitron™ 3 Fan Disc 1169F to sand or finish in a single step without having to change the abrasive. The reason for this is that, unlike a fibre disc of the same grit size, the 1169F produces a finish that is one grit finer under normal conditions. Although the fibre disc grinds faster, this fan-shaped grinding disc eliminates the need for additional work steps and disc changes, saving you time.

Removal, finishing, edge grinding

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The 3M™ Cubitron™ II Flap Disc 967A is designed to deliver outstanding grinding performance in applications requiring low to medium contact pressure. With its unique construction and 3M precision-shaped abrasive grain, it offers an impressive removal rate and extended service life. This disc is ideal for flat surfaces and external edges where surface quality and edge stability are critical.Thanks to the integrated abrasive lubricant, the grinding temperature is reduced, which minimises discolouration and oxidation of the metal and reduces heat-induced stress cracks. The flap disc enables grinding and finishing in a single step and can often replace fibre and roughing discs. Its durable, heavy-duty Y-viscose backing ensures controlled, even wear, allowing the disc to be used to its full potential at medium to high contact pressures.The 3M Cubitron II Fan Disc 967A utilises precision-shaped abrasive grains, which, thanks to their triangular shape, continuously form sharp points and thus cut efficiently. This enables extremely fast cutting and a high surface quality with less effort. The overlapping flaps of the flap disc ensure a uniform and fast grind, whilst the padding of the flaps produces a high-quality finish that is one grade finer than that of a fibre disc of the same quality.The 3M Cubitron II Flap Disc 967A offers an excellent increase in productivity by completing grinding and finishing in a single step. It represents a cost-effective and time-saving solution, particularly where surface quality and scratch resistance are paramount. The disc is designed for use with angle grinders and delivers excellent performance when working on a wide range of metals.

The ceramic grain, precision-moulded by 3M, plays a significant role in the performance of this disc. The tips of the triangular grains break off during the grinding process, ensuring that sharp cutting edges are always maintained. This ensures that the surface of the material is continuously machined cleanly. The result is a fast, cool grind and an extended service life for the abrasive.

The ceramic grain, precision-moulded by 3M, plays a significant role in the performance of this disc. The tips of the triangular grains break off during the grinding process, ensuring that sharp cutting edges are always maintained. This ensures that the surface of the material is continuously machined cleanly. The result is a fast, cool grind and an extended service life for the abrasive.

The ceramic grain, precision-moulded by 3M, plays a significant role in the performance of this disc. The tips of the triangular grains break off during the grinding process, ensuring that sharp cutting edges are always maintained. This ensures that the surface of the material is continuously machined cleanly. The result is a fast, cool grind and an extended service life for the abrasive.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.

The precision-shaped ceramic grain contained in the fan-shaped disc enables exceptionally high material removal at lower contact pressure. This abrasive grain forms triangular tips that cut through the metal rather than gouging or ‘ploughing’ through it, as conventional abrasives do. Fan discs are three-dimensional grinding discs consisting of overlapping, abrasive-coated, fibre-reinforced lamellae that fan out from a central hub. As the overlapping layers of lamellae wear down, lamellae with fresh abrasive mineral are continuously exposed. This enables a fast and even grind, and the padding of the lamellae produces a homogeneous surface finish. Under normal conditions, our fan discs produce a finish that is one grade finer than that of a fibre disc of the same quality. Thanks to their overlapping construction, more abrasive material can be applied to the cutting surface, making them significantly superior to typical grinding discs. For this reason, our discs enable a significant increase in productivity during grinding processes. They perform two tasks in a single step – grinding and finishing – and can therefore replace bonded abrasive discs and fibre discs. They are a useful time- and cost-saving solution for a wide range of applications, particularly where surface quality and cut resistance are critical. Our flap discs are designed for angle grinders.