Rolls

Use 3M™ Premium Brown Machine Pads for dry film restoration of protected floors or for wet cleaning with any suitable deep-cleaning solution.

3M™ Economy Machine Pads, Black are the industry standard for wet removal of old, soiled floor sealants and for heavy-duty cleaning. The fibre blend increases friction, ensuring that floor sealants, black streaks and dirt are effectively removed. Can also be used for heavy-duty cleaning of concrete and industrial floors. Proven consistent performance with a long pad life.

3M™ Economy Machine Pads, Blue, restore a new shine to dull floors. Designed for frequent polishing with less dust and less heat build-up. They can also be used for dry scrubbing of heavily soiled floors or for spray cleaning of normally soiled floors. Also recommended for dry deep cleaning of soft floors. The mineral abrasives are distributed not only on the surface but evenly throughout the entire pad. This ensures impressive cleaning performance and a long service life.

The 3M™ Economy Machine Pads, Green, deliver a superior shine. A medium-grit pad designed to remove stains and dirt. The solution for a fine finish. Also suitable for preparing hard floors for resealing, as well as for deep cleaning soft floor coverings such as linoleum and vinyl. Exceptional durability and service life: the mineral abrasives are distributed not just on the surface, but evenly throughout the entire pad. This ensures impressive cleaning performance and a long service life.

The 3M™ Economy Machine Pads, Red, are designed for daily cleaning and light scrubbing to remove light soiling, scuffs and black heel marks. They can be used damp for cleaning and dry for polishing. Quickly remove scuff marks to improve the appearance of the floor.

3M™ Economy Machine Pads, White are used for light cleaning to remove dirt and scuffs. This minimises the risk of the sealant becoming dull. Well-maintained floors will not be scratched or damaged. They can also be used to polish wooden floors to enhance the surface shine.

For the most demanding surface quality requirements on all extremely hard materials. All Diamond Lapping films should be used ‘wet’. Water, emulsion or other standard cooling fluids may be used as lubricants.

Mit der 3M™ Handrolle Soft 216U erhalten Sie ein flexibles Werkzeug mit geringem Zusetzverhalten. Unsere auf Schaumstoffträgermaterial aufgebrachten Schleifrollen können in Streifen gerissen oder geschnitten werden und eignen sich ideal für die manuelle Bearbeitung von Lack, Füller und Spachtelmassen. Verwenden Sie für maximale Flexibilität beim Schleifen unsere 3M™ Handrollen Soft 216U. Unsere vorgeschnittenen Schleifrollen wurden für das Schleifen von Hand optimiert. Sie bieten hohe Flexibilität sowie ein geringes Zusetzverhalten und werden für das Schleifen von Lacken, Füller und Spachtelmassen verwendet. Besonders gut bei feiner Körnung, bei denen das geringe Zusetzverhalten deutlich bemerkbar ist. Die Rollen gehören zu den unseren hochwertigen Schleifmitteln, mit denen ein gleichmäßiges Ergebnis ermöglicht wird. Die Maße der Rollen sind 114mm x 25m, und die Produkte sind in verschiedenen Körnungen im Bereich von P150 bis P1000 verfügbar.

Electrostatically sprayed abrasive film Materials For the most demanding surface quality requirements, combined with high cutting performance and an exceptional finish.

3M™ Cubitron™ II Mesh Sanding Strips on a roll offer the outstanding stock removal rate and long service life of a Cubitron II abrasive. They have been designed to ensure that extraction units perform at their best, leaving virtually no dust on the work surface or in the surrounding area. When combined with a 3M-recommended sanding and dust extraction system, they create the ideal dust extraction system for your workshop. Reduce the time you spend sanding with 3M™ Cubitron™ II Mesh Sanding Strips on a roll. Our fast-cutting, long-lasting mesh sanding strips feature a mesh backing and sharp 3M™ Cubitron™ II abrasive grains, which work together to deliver the best possible cut without compromising dust extraction. They are designed to be compatible with standard dust extraction systems such as portable extraction units, centralised extraction systems and sanders with extraction bags. They are available in three sizes – 70 mm (2.75 inches), 80 mm (3 inches) and 115 mm (4.5 inches) – in grits ranging from 80+ to 320+. They enable car repairs, from removal to paint preparation, to be completed more quickly. Their long service life means fewer interruptions are needed to change the abrasive, whilst their faster removal rate reduces the time spent sanding. Time savings that are well worth it. The rolls feature perforations to ensure the required section can be torn off easily. They allow you to choose the strip length you need for your project. With 3M™ Cubitron™ II grid sanding strips on a roll, there is no need to compromise on dust extraction. You don’t have to settle for abrasives that don’t deliver the desired removal rate, such as those that wear down slowly but still don’t last long, or those that are cheaper per strip but still reduce your overall profit. When combined with a 3M-recommended sanding and dust extraction system, this creates the ideal dust extraction system for your workshop.

3M™ Blue Mesh Sanding Strips on a roll are made from a special ceramic-mineral blend that ensures a high removal rate and a long service life for the strips. They also offer excellent dust removal when used with a dust extraction system. Boost productivity without straining your budget – with 3M™ Blue Mesh Sanding Strips on a roll. Our mesh sanding strips offer excellent removal performance at a budget-friendly price. They have an excellent removal rate and service life. They are also ideal for maximising the performance of your extraction unit. Whether you have a centralised extraction system, a mobile extraction unit or a sander with its own extraction system – these strips help minimise dust on your work surface and in the environment. The 3M™ Hookit™ backing makes changing the strips quick and easy. Available in grits from 80 to 320, in two widths: 70 mm (2.75 inches) and 115 mm (4.5 inches). Designed to help you work faster, from stripping to paint preparation.

Sanding of solid wood and veneer on all types of wood used in furniture manufacturing. Thanks to its smooth running action, 3M™ 241UZ offers excellent handling and outstanding removal rates.

For an exceptional finish on extremely hard materials such as ceramics, stone and glass, use 3M™ Diamond Lapping Film 661X. Our precisely graded diamond particles, applied to a polyester film, produce a uniform finish. Available in various grades ranging from 0.10 to 30.0 microns. For the highest demands on surface quality on all extremely hard materials. All Diamond Lapping Films should be used ‘wet’. Water, emulsion or other commercially available coolants can be used as grinding aids.

For an exceptional finish on extremely hard materials such as ceramics, stone and glass, use 3M™ Diamond Lapping Film 661X. Our precisely graded diamond particles, applied to a polyester film, produce a uniform finish. Available in various grades ranging from 0.10 to 30.0 microns. For the highest demands on surface quality on all extremely hard materials. All Diamond Lapping Films should be used ‘wet’. Water, emulsion or other commercially available coolants can be used as grinding aids.

The 3M™ Soft 216U Hand Roll is a flexible tool with low clogging. Our sanding rolls, which are applied to a foam backing, can be torn or cut into strips and are ideal for manual finishing of paint, primer and body fillers. For maximum flexibility when sanding, use our 3M™ Soft 216U Hand Rolls. Our pre-cut sanding rolls have been optimised for manual sanding. They offer high flexibility and low clogging, and are used for sanding paints, primers and fillers. They perform particularly well with fine grits, where the low clogging is clearly noticeable. The rolls are part of our range of high-quality abrasives, which ensure a consistent finish. The rolls measure 114 mm x 25 m, and the products are available in various grits ranging from P150 to P1000.

Der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle bietet einen schnellen Abtrag sowie eine lange Standzeit und weist eine erhöhte Kantenstabilität sowie eine ausgezeichnete Beständigkeit gegen Faltenbildung auf. Ihre mineralische Schleifmittelmischung wurde auf eine verbesserte Haltbarkeit und ein gleichmäßiges, hochwertiges Finish ausgelegt. In Verbindung mit Staubabsaugsystemen bietet der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle eine hervorragende Staubentfernung und minimiert das Staubaufkommen auf der Arbeitsfläche oder in der Umgebung. Der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle eignet sich für hocheffiziente Schleifaufgaben bei der Autoreparatur, bei denen Sie eine gleichbleibend hohe Qualität erzielen und zugleich Ihre Staubabsaugung maximieren möchten. Der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle besteht aus einer ausgewogenen Mineralmischung aus Keramik und Aluminiumoxid und bietet eine lange Standzeit und eine hohe Abtragsrate. Zugleich ermöglicht er eine hervorragende Staubabsaugung, wodurch Schleifmittelwechsel und der Zeitaufwand beim Schleifen reduziert werden. Der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle ist mit dem 3M™ Hookit™ Befestigungssystem ausgestattet, das einen schnellen und einfachen Streifenwechsel ermöglicht. Dadurch werden Ausfallzeiten reduziert und die Produktivität erhöht. Dieser Streifen auf Rolle ist in verschiedenen Körnungen erhältlich und eignet sich hervorragend für Arbeitsschritte bei der Autoreparatur, von der Demontage bis zur Lackvorbereitung. Die hervorragende Staubabsaugung sorgt für eine sauberere Arbeitsumgebung, bei der es praktisch zu keinem Staubaufkommen kommt. Dies wiederum trägt dazu bei, Produktivität und Effizienz zu steigern. Der 3M™ Hookit™ Gitternetz-Schleifstreifen Blau auf Rolle wird zur Verwendung mit dem 3M™ Exzenterschleifsystem empfohlen, einer kompletten Schleiflösung für die effiziente Durchführung Ihrer wesentlichen Arbeitsschritte zur Oberflächenvorbereitung und -bearbeitung. Das System umfasst unsere Absaugeinheiten, Druckluft- oder elektrische Exzenterschleifer sowie eine breite Palette an Zubehör. Mit dem 3M™ Exzenterschleifsystem verfügen Sie über eine Komplettlösung, mit der Sie sich einen saubereren Arbeitsbereich und effizientere Zykluszeiten sichern.

The 3M™ Economy Machine Pads, Red, are designed for daily cleaning and light scrubbing to remove light soiling, scuffs and black heel marks. They can be used damp for cleaning and dry for polishing. Quickly remove scuff marks to improve the appearance of the floor.

3M™ Economy Machine Pads, White are used for light cleaning to remove dirt and scuffs. This minimises the risk of the sealant becoming dull. Well-maintained floors will not be scratched or damaged. They can also be used to polish wooden floors to enhance the surface shine.

A new way to sand. Thanks to 3M, dust extraction and sanding performance are no longer at odds with one another. By combining the legendary technology of 3M’s precision-shaped ceramic grain with a mesh backing, the 3M Xtract™ Cubitron™ II mesh sanding paper roll 710W achieves an industry-leading removal rate whilst enabling virtually dust-free sanding. The 3M Precision-Shaped Ceramic Grain continuously breaks into sharp cutting edges, offering twice the service life and twice the cutting performance of leading competitor mesh abrasives. Take advantage of the 3M Xtract™ Cubitron™ II 710W mesh sanding paper roll to gain a competitive edge in your industry – from metal and woodworking to applications in aerospace, marine, rail and automotive OEM operations. Ensures a safer working environment – because a cleaner working environment is a safer working environment. The 3M Xtract™ Cubitron™ II 710W mesh sanding paper roll enables the extraction of up to 99% of the dust generated during sanding, creating a cleaner and virtually dust-free working environment. Furthermore, the 3M precision grain in the sanding paper requires less pressure from the user, making sanding more comfortable. Benefit from the advantages of 3M Xtract™ random orbital sanding solutions. 3M is your partner for all your sanding applications. From mesh sanding sheets and discs to random orbital sanders and mobile dust extraction units, we offer everything you need to improve workpiece quality and productivity in your workshop. 3M’s technical experts have decades of application and industry knowledge to ensure you receive the right abrasive and the optimal system solution. Applications in focus: metalworking and processing, sanding of fillers, sanding of gel coats, sanding of composites, woodworking

Sanding of solid wood and veneer on all types of wood used in furniture manufacturing. Thanks to its smooth running action, 3M™ 241UZ offers excellent handling and outstanding removal rates.

A 3-millimetre polyester film backing coated with aluminium oxide grit, featuring a softer synthetic resin system with grit sizes ranging from 0.05 to 60 microns. Used for polishing fibre-optic components and for precision lapping processes. Ensures smooth surfaces on precision electronic components. 3M™ Lapping Film 263X on a 3-mil film backing with aluminium oxide grit is available in grit sizes ranging from 0.05 to 60 microns across 7 grades. It is a 3M Lapping Film Type P with a harder bonding system for hard materials.

The 3M™ Cubitron™ II Stikit™ Paper Disc Roll 732U features 3M’s precision-shaped ceramic abrasive grain – a revolutionary advancement in abrasive technology. The triangularly shaped ceramic mineral is designed to cut through the substrate rather than gouging or ‘ploughing’ it, as conventional abrasives do. As a result, the paper disc offers fast stock removal and a long service life. These discs, now available in grits from 80+ to 1,000+, have been developed for a wide range of substrates and applications, offering flexibility and versatility in use. The discs are suitable for a wide range of tasks, from material removal to fine-tuning and finishing various surfaces and substrates, including metals, paints, composites, gel coats and various types of wood. The C-paper backing offers flexibility and is suitable for sanding applications where edge stability is not a priority. The best results are achieved when used with 3M™ random orbital sanders. With the 3M™ Stikit™ system, there is no need for the time-consuming application of adhesive to the disc’s backing material. Thanks to their pressure-sensitive adhesive coating on the back, these high-quality, coated abrasives are ready for immediate use and can be attached to your sanding pad as effortlessly as a sticker. And as the adhesive is pressure-sensitive, the disc can be removed from the sanding pad just as easily, leaving a clean surface for your next disc. A Stikit™ disc must be pressed onto a fitted Stikit backing pad (also known as a sanding pad and available separately).

The 3M™ Economy Machine Pads, Green, deliver a superior shine. A medium-grit pad designed to remove stains and dirt. The solution for a fine finish. Also suitable for preparing hard floors for resealing, as well as for deep cleaning soft floor coverings such as linoleum and vinyl. Exceptional durability and service life: the mineral abrasives are distributed not just on the surface, but evenly throughout the entire pad. This ensures impressive cleaning performance and a long service life.

Sanding of solid wood and veneer on all types of wood used in furniture manufacturing. Thanks to its smooth running action, 3M™ 241UZ offers excellent handling and outstanding removal rates.