Mixing nozzles
3M Mischdüsen und Scotch-Weld Statik-Mischer sind präzise Dosierhilfen für 2K-Klebstoffe und mischen beide Komponenten automatisch gleichmäßig beim Auspressen. Sie gewährleisten saubere Verarbeitung ohne manuelles Mischen und verhindern Verstopfungen. Ideal für Handwerk, Industrie und Montageanwendungen mit Zweikomponenten-Systemen.
3M™ Scotch-Weld™ EPX™ Statik-Mischer, Quadro für 48.5 ml und 50 ml Kartuschen, 36 Stück/Karton
3M™ Scotch-Weld™ 2-Komponenten-Konstruktionsklebstoffe verarbeiten Sie mit dem EPX-System: Dosieren - Mischen - Auftragen finden in nur einem Arbeitsgang statt. Innerhalb der Mischdüse für 48,5 ml Kartuschen entsteht durch die chemische Reaktion beider Komponenten der eigentliche Konstruktionsklebstoff.
3M™ Scotch-Weld™ EPX™ Static Mixer Nozzle, White Helical, for 48.5 ml and 50 ml cartridges, 72 pieces per box
Thorough mixing and precise placement Our 3M™ Scotch-Weld™ EPX mixing nozzles meet the exact requirements for easy and consistent application. This 3M-approved accessory works with 3M Duo-Pack cartridges to dispense, mix and apply two-component adhesives and potting compounds simultaneously. The tapered tips can be trimmed to achieve a precise bead size. Recommended applications: Attach to 3M Duo-Pack structural adhesive cartridges Dispense using 3M EPX manual or pneumatic applicators Minimises adhesive waste Simply store leftover adhesive with the used nozzle to ensure a good seal. When you have finished, replace it with a new nozzle to continue using the remaining adhesive in the cartridge. Choose genuine 3M accessories to ensure the precise performance of 3M™ Scotch-Weld™ EPX applicators, providing the ideal system for on-site assembly, maintenance and service.
3M™ Dynamic Mixing System Mixing Nozzle Holder, Red, 50602
Store the 3M™ DMS nozzles in the 3M™ nozzle holder. Our wire nozzle holder keeps the nozzles within easy reach of workshop staff, thereby increasing productivity. Always keep the 3M™ DMS nozzles within easy reach in the 3M™ nozzle holder. Our wire nozzle holder keeps the nozzles within easy reach of workshop staff in a dispenser box, thereby increasing productivity. Our DMS nozzle holder is magnetically attached and can be quickly and easily moved to another location in the workshop if required.
3M™ Cylinder Nozzle 9501 for cylinder spray adhesives, spray width 10 cm to 30 cm, 1 pc.
Apply 3M™ Scotch-Weld™ two-component structural adhesives using the EPX system: simple, quick and clean. The EPX hand applicator enables mobile and independent application and is used with the 400 ml large cartridges.
3M™ Hochleistungs-Spritzapplikatordüsen und -anschlussteile für Sprühklebstoffe in Dispersionszylindern, 5 Disposable Nozzles, 2 Gaskets and 1 Retaining Ring, 4 Kit/Case
Die 3M™ Hochleistungs-Spritzdüsen für Sprühklebstoffe in Dispersionszylindern sind auf die Verwendung mit dem Spritzapplikator für Sprühklebstoffe in Dispersionszylindern ausgelegt. Da es sich um Einwegdüsen handelt, entfällt die zeitaufwendige Reinigung des Spritzapplikators. Im Lieferumfang enthalten sind 5 Düsen, 2 Dichtungen und 1 Sicherungsring.
3M™ mixing nozzles for dual-cartridge systems, for 05901 & 08122, Part number: 08198NEW
The 3M™ nozzles for flexible parts repair compound are designed as quick and easy-to-replace replacement nozzles. Our nozzles fit the 48.5 ml twin cartridges of 3M™ Flexible Parts Repair Compound 05901, as well as the 50 ml cartridges of 3M™ Structural Adhesive 08122.
3M™ Scotch-Weld™ EPX static mixer for 50 ml cartridges, 12 per pack
Thorough mixing and precise placement Our 3M™ Scotch-Weld™ EPX mixing nozzles meet the exact requirements for easy and consistent application. This 3M-approved accessory works with 3M Duo-Pack cartridges to dispense, mix and apply two-component adhesives and potting compounds simultaneously. The tapered tips can be trimmed to achieve a precise bead size. Recommended applications: Attach to 3M Duo-Pack structural adhesive cartridges Dispense using 3M EPX manual or pneumatic applicators Minimises adhesive waste Simply store leftover adhesive with the used nozzle to ensure a good seal. When you have finished, replace it with a new nozzle to continue using the remaining adhesive in the cartridge. Choose genuine 3M accessories to ensure the precise performance of 3M™ Scotch-Weld™ EPX applicators, providing the ideal system for on-site assembly, maintenance and service.
3M™ Scotch-Weld™ EPX mixing nozzle for 490 ml cartridges, 10:1, orange helical, high throughput, 36 per box
3M™ Scotch-Weld™ two-component structural adhesives are applied using the EPX system: dispensing, mixing and application all take place in a single step. The actual structural adhesive is formed inside the mixing nozzle for 490 ml cartridges as a result of the chemical reaction between the two components.
3M™ nozzles for 48.5 ml cartridges, suitable for products 04748, 55045, 34240 and 04908, 50 pieces per box
3M™ nozzles for 48.5-ml cartridges are designed for mixing two-component materials. With our transparent mixing nozzles, the products are thoroughly mixed after blending and extruded in a ready-to-use form. These nozzles are designed for use with 3M™ Super-Fast and 3M™ Fast Adhesives.
3M™ Scotch-Weld™ EPX™ static mixers for 400 ml cartridges, 36 per box
3M™ Scotch-Weld™ two-component structural adhesives are applied using the EPX system: dispensing, mixing and application all take place in a single step. The actual structural adhesive is formed inside the mixing nozzle for 400 ml cartridges as a result of the chemical reaction between the two components.
3M™ Scotchcast™ TNM Mixing Nozzle TWIST-N-MIX
Spray gun nozzles for TNM two-component mixing system resins
3M™ Cylinder Nozzle 4001 for cylinder-type spray adhesives, spray width 5 cm to 15 cm, 1 pc.
Apply 3M™ Scotch-Weld™ two-component structural adhesives using the EPX system: simple, quick and clean. The EPX hand applicator enables mobile and independent application and is used with the 400 ml large cartridges.
3M™ Dynamic Mixing Nozzles, 50601
Mix materials without trapping air using the 3M™ DMS nozzle. Our snap-on nozzles actively and thoroughly mix the materials together without allowing air to enter the mixture. The material is delivered to the target faster than with any combination of a manual applicator and a static mixing nozzle. The DMS nozzle is part of our unique DMS (Dynamic Mixing System). Dispense the required material anytime, anywhere at the touch of a lever. No messy mixing, less material waste and minimised cleaning effort. You always get the right amount of product with the lowest possible consumption, saving you both material and time.
3M™ Scotch-Weld™ EPX™ Quadro mixing nozzle for 45 ml cartridges, 72 pieces per box
Thorough mixing and precise placement Our 3M™ Scotch-Weld™ EPX mixing nozzles meet the exact requirements for easy and consistent application. This 3M-approved accessory works with 3M Duo-Pack cartridges to dispense, mix and apply two-component adhesives and potting compounds simultaneously. The tapered tips can be trimmed to achieve a precise bead size. Recommended applications: Attach to 3M Duo-Pack structural adhesive cartridges Dispense using 3M EPX manual or pneumatic applicators Minimises adhesive waste Simply store leftover adhesive with the used nozzle to ensure a good seal. When you have finished, replace it with a new nozzle to continue using the remaining adhesive in the cartridge. Choose genuine 3M accessories to ensure the precise performance of 3M™ Scotch-Weld™ EPX applicators, providing the ideal system for on-site assembly, maintenance and service.
3M™ Cylinder Nozzle 6501 for cylinder-type spray adhesives, spray width 7 cm to 20 cm, 1 pc.
Apply 3M™ Scotch-Weld™ two-component structural adhesives using the EPX system: simple, quick and clean. The EPX hand applicator enables mobile and independent application and is used with the 400 ml large cartridges.
3M™ Scotch-Weld™ EPX static mixer for 250 ml cartridges DP600SL, 36 pcs
3M™ Scotch-Weld™ two-component structural adhesives are applied using an applicator designed for 310 ml cartridges: dispensing, mixing and application all take place in a single step. The actual structural adhesive is formed inside the mixing nozzle as a result of the chemical reaction between the two components.
3M™ Scotch-Weld™ EPX™ static mixers for 200 ml or 400 ml cartridges, 36 per box
3M™ Scotch-Weld™ two-component structural adhesives are applied using the EPX system: dispensing, mixing and application are all carried out in a single step. Inside the mixing nozzle for 200 ml cartridges of SW 7271 B / A, the actual structural adhesive is formed by the chemical reaction between the two components.
3M™ PU Joint Sealant, Nozzles
3M™ nozzles for polyurethane sealants in cartridges are suitable as replacement nozzles for 3M™ polyurethane joint sealants. Our high-quality plastic nozzle is specially designed to fit our polyurethane sealant cartridges. Our nozzles are the ideal replacement for blocked or lost nozzles. Always keep a small stock on hand.