Mobile horizontal lanyards/fall protection
Zuverlässige Absturzsicherung bei Arbeiten in der Höhe
Das sichere Bewegen in horizontaler/vertikaler Richtung entlang von Leitern, Anlagen oder erhöhten Arbeitsplätzen wird durch diesen Systemen ermöglicht. Sie stellen eine kontrollierte Verbindung zwischen Anwender und Sicherungssystem her und tragen entscheidend dazu bei, Risiken bei Montage-, Wartungs- und Servicearbeiten zu minimieren.
Je nach Arbeitsumgebung kommen unterschiedliche Systeme zum Einsatz – etwa Höhensicherungsgeräte mit automatisch einziehendem Sicherungsseil für flexible Bewegungen oder vertikale Steigschutzsysteme, die speziell für sichere Auf- und Abstiege an Leitern und Steigwegen entwickelt wurden. Zuverlässiger Schutz mit hoher Bewegungsfreiheit und Unterstützung effizienter Arbeitsabläufe in Industrie, Bau und technischen Servicebereichen.
Unser Produktprogramm umfasst unter anderem die 3M DBI-SALA Nano-Lok/Sealed-Blok/Ultra-Lok Höhensicherungsgeräte, Lad-Saf vertikale Sicherheitssystem mit vertikalen Kabelsicherungssystemen & Sicherungsseilen, 3M Protecta Self-Retracting Lifeline Cover sowie 3M Protecta Sicherungsgeräte, die eine flexible Anpassung an unterschiedliche Arbeitssituationen ermöglichen.
3M™ DBI-SALA® Lad-Saf™ Rope Guide, 6100400
The 3M™ DBI-SALA® Lad-Saf™ rope guides are an essential component of the flexible vertical Lad-Saf rope safety system. They consist of an upper and a lower bracket, which serve as anchors for a steel wire rope that runs the entire length of the climbing area. A 3M™ DBI-SALA® Lad-Saf™ sleeve connects the user to the system, automatically follows the user as they ascend and locks onto the wire rope in the event of a fall, thereby catching the user. The optional brackets are designed for user-friendliness, cost-effectiveness and versatility and can be bolted or welded in place. The size and design of the rung clamps can be selected, as can systems for straight or curved ladders and for connections to timber, concrete or steel structures. Hundreds of different brackets, designs and configurations are available, suitable for virtually any type of application. The versatile system can also be used by up to four users simultaneously, thereby increasing flexibility at the workplace. 3M™ DBI-SALA® Lad-Saf™ Vertical Rope Access Systems have been newly developed to simplify and speed up the installation process of the fall protection system. With up to 72% fewer loose components* than in some of our earlier models, these systems have been optimised for easier assembly and maintenance of numerous structures, such as access ladders and telecommunications towers. They have also been designed to meet the requirements of CE EN353-1 when used with our Lad-Saf™ X2 or X3 sleeves. This helps you comply with current fall protection standards.
3M™ DBI-SALA® Nano-Lok™ Edge Fall Arrest Device, Single-strand, Webbing, 2.5 m, 3101432
The 3M™ DBI-SALA® Nano-Lok™ Edge fall arrest device (FAD) has been specifically designed for applications involving anchor points at foot level and edge-of-structure situations, as commonly found in the construction industry. The fall arrest device features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. Nano-Lok™ Edge has been specifically developed for applications involving foot-level anchor points and sharp edge hazards, as commonly found in the construction industry. It features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. The compact and lightweight construction is practically unnoticeable on the back. It does not restrict the user’s freedom of movement and is ideal as a replacement for a lanyard. Whether your application requires a single- or double-strand configuration, attachment to an overhead anchor point or a direct connection to the safety harness: there are numerous models to choose from for almost any application. Nano-Lok™ locks quickly – a fall is stopped after just a few centimetres, giving you better protection at low heights. Furthermore, the safety rope remains taut at all times to reduce the risk of snagging, tangling and tripping.
3M™ DBI-SALA® Sealed-Blok™ RSQ fall arrest device, stainless steel rope, 25 m, 3400892
The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) incorporates a patented design that helps protect components such as the motor spring and brake from contaminants such as grease, moisture and dirt. It also features patent-pending technology that reduces retraction speed, thereby limiting the impact of a released lanyard on the fall arrest device and surrounding equipment. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is IP-69K certified and offers protection against dust ingress, high temperatures and high-pressure water for use in extreme environmental conditions. These fall arrest devices are available in HSG, rescue HSG and RSQ™ configurations. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) is indispensable for rescue operations in confined spaces and during entry. It operates quickly and efficiently in the most challenging environments. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is one of the most important components of a rescue system, as it provides the means to bring an injured worker to safety. This fall arrest device is designed so that the safety rope extends and retracts automatically, adapting to the user’s movements. This allows the user to move at a normal pace within a recommended working range. In the event of a fall, the fall arrest device’s internal centrifugal fall arrest system stops the fall and reduces the forces acting on the user to a safe level.
3M™ Protecta® Self-Retracting Lifeline Cover 3590011, fits 50 ft standard and 33 ft leading edge models
Maintenance and repair parts for fall arrest devices (FADs) with internal braking systems ensure that the unit passes inspections carried out by a qualified person. Common repair parts for PPE include: ratchet, ratchet spring, motor spring, brake, housing, drum, labels, safety rope attachments and various components. When entering confined spaces, it is important that the equipment functions flawlessly and quickly. Lightweight, portable Protecta® aluminium tripods are ideal for entering and exiting confined spaces via manholes. They are easy to transport between job sites and can be set up by a single person. When used in conjunction with one or two mechanical devices (e.g. a winch or a triple-function fall arrest device), the tripod is ready for immediate use. In addition to many other functions and features, our tripods are equipped with lockable legs that are easily secured with locking pins, a mechanical quick-release device mount, a safety chain to prevent movement and slipping, and non-slip feet.
3M™ Protecta® Fall Arrest System, Lanyard, 15.0 m, 3590571
The 3M™ Protecta® fall arrest device (FAD) is a robust, lightweight and cost-effective solution for fall protection that allows you to avoid compromising on performance or safety. The 3M™ Protecta® fall arrest device is available with a range of lanyard lengths and materials, and its design ensures a long service life. Designed with the worker’s needs in mind, it features a stackable housing, a webbing or steel lanyard, and a built-in, swivelling anchor point for added comfort and ease of use. Available in HSG, personal HSG, edge HSG and rescue HSG configurations. The 3M™ Protecta® Fall Arrest Device (FAD) extends and retracts with the user as they carry out their work task. In the event of a fall, a braking system with a speed sensor reduces the fall height and the forces acting on the user to safe levels. Furthermore, the safety lanyard remains taut at all times to reduce the risk of snagging, tangling and tripping. Whether the application requires a single- or dual-line configuration, attachment to an overhead anchor point or a direct connection to a safety harness, there are several models available to suit a wide range of applications. The 3M™ Protecta® fall arrest device is equipped with an integrated carrying handle, which makes it easier to transport the device to the work site.
3M™ Spare Parts
Maintenance and repair parts for fall arrest devices (FADs) with internal braking systems ensure that the unit passes inspections carried out by a qualified person. Common repair parts for PPE include: ratchet, ratchet spring, motor spring, brake, housing, drum, labels, safety rope attachments and various components. When entering confined spaces, it is important that the equipment functions flawlessly and quickly. Lightweight, portable Protecta® aluminium tripods are ideal for entering and exiting confined spaces via manholes. They are easy to transport between job sites and can be set up by a single person. When used in conjunction with one or two mechanical devices (e.g. a winch or a triple-function fall arrest device), the tripod is ready for immediate use. In addition to many other functions and features, our tripods are equipped with lockable legs that are easily secured with locking pins, a mechanical quick-release device mount, a safety chain to prevent movement and slipping, and non-slip feet.
3M™ DBI-SALA® Lad-Saf™ Vertical Safety System, L-shaped rope guide, stainless steel, 41.2 cm x 5.15 cm, 6100513
The 3M™ DBI-SALA® Lad-Saf™ rope guides are an essential component of the flexible vertical Lad-Saf rope safety system. They consist of an upper and a lower bracket, which serve as anchors for a steel wire rope that runs the entire length of the climbing area. A 3M™ DBI-SALA® Lad-Saf™ sleeve connects the user to the system, automatically follows the user as they ascend and locks onto the wire rope in the event of a fall, thereby catching the user. The optional brackets are designed for user-friendliness, cost-effectiveness and versatility and can be bolted or welded in place. The size and design of the rung clamps can be selected, as can systems for straight or curved ladders and for connections to timber, concrete or steel structures. Hundreds of different brackets, designs and configurations are available, suitable for virtually any type of application. The versatile system can also be used by up to four users simultaneously, thereby increasing flexibility at the workplace. 3M™ DBI-SALA® Lad-Saf™ Vertical Rope Access Systems have been newly developed to simplify and speed up the installation process of the fall protection system. With up to 72% fewer loose components* than in some of our earlier models, these systems have been optimised for easier assembly and maintenance of numerous structures, such as access ladders and telecommunications towers. They have also been designed to meet the requirements of CE EN353-1 when used with our Lad-Saf™ X2 or X3 sleeves. This helps you comply with current fall protection standards.
3M™ DBI-SALA® Sealed-Blok™ fall arrest device, stainless steel rope, 9.0 m, 3400856
The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) incorporates a patented design that helps protect components such as the motor spring and brake from contaminants such as grease, moisture and dirt. It also features patent-pending technology that reduces retraction speed, thereby limiting the impact of a released lanyard on the fall arrest device and surrounding equipment. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is IP-69K certified and offers protection against dust ingress, high temperatures and high-pressure water for use in extreme environmental conditions. These fall arrest devices are available in HSG, rescue HSG and RSQ™ configurations. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) is indispensable for rescue operations in confined spaces and during entry. It operates quickly and efficiently in the most challenging environments. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is one of the most important components of a rescue system, as it provides the means to bring an injured worker to safety. This fall arrest device is designed so that the safety rope extends and retracts automatically, adapting to the user’s movements. This allows the user to move at a normal pace within a recommended working range. In the event of a fall, the fall arrest device’s internal centrifugal fall arrest system stops the fall and reduces the forces acting on the user to a safe level.
3M™ DBI-SALA® Lad-Saf™ Vertical Safety System Rope Guide, up to 60 m height, stainless steel, 6100401
The 3M™ DBI-SALA® Lad-Saf™ rope guides are an essential component of the flexible vertical Lad-Saf rope safety system. They consist of an upper and a lower bracket, which serve as anchors for a steel wire rope that runs the entire length of the climbing area. A 3M™ DBI-SALA® Lad-Saf™ sleeve connects the user to the system, automatically follows the user as they ascend and locks onto the wire rope in the event of a fall, thereby catching the user. The optional brackets are designed for user-friendliness, cost-effectiveness and versatility and can be bolted or welded in place. The size and design of the rung clamps can be selected, as can systems for straight or curved ladders and for connections to timber, concrete or steel structures. Hundreds of different brackets, designs and configurations are available, suitable for virtually any type of application. The versatile system can also be used by up to four users simultaneously, thereby increasing flexibility at the workplace. 3M™ DBI-SALA® Lad-Saf™ Vertical Rope Access Systems have been newly developed to simplify and speed up the installation process of the fall protection system. With up to 72% fewer loose components* than in some of our earlier models, these systems have been optimised for easier assembly and maintenance of numerous structures, such as access ladders and telecommunications towers. They have also been designed to meet the requirements of CE EN353-1 when used with our Lad-Saf™ X2 or X3 sleeves. This helps you comply with current fall protection standards.
3M™ DBI-SALA® Nano-Lok™ Fall Arrest Device, Double-strand, Webbing, 1.8 m, 3101345
The 3M™ DBI-SALA® Nano-Lok™ fall arrest device is lightweight and compact and can be carried comfortably on the back. It is designed not to get in the way and can also be used as a replacement for a lanyard. The 3M™ DBI-SALA® Nano-Lok™ fall arrest device is compatible with connections at shoulder and foot height and is available in various configurations. It offers versatility for many different industrial applications. The 3M™ DBI-SALA® Nano-Lok™ fall arrest device combines lightweight design with durability and functionality. Comfort and safety were the top priorities during its development to protect you when working at height. Lightweight with many special features. The extremely compact design is practically unnoticeable on your back. It is ideal as a replacement for a standard lanyard and does not hinder your movement. The Nano-Lok’s quick-release automatic brake achieves a fall height of 1.2 m. This provides you with better protection at low heights, with an average arrest force of 400 daN and a maximum arrest force of 600 daN. The constant pre-tension of the safety lanyard reduces the risk of snagging, entanglement and tripping. Thanks to the lightweight quick-connect system, the time required for connecting and disconnecting is reduced. The fall arrestor cover made of nitrile rubber is compact and durable.
3M™ DBI-SALA® Nano-Lok™ Edge Fall Arrest Device, Double-strand, Rope, 2.5 m, 3500241
The 3M™ DBI-SALA® Nano-Lok™ Edge fall arrest device (FAD) has been specifically designed for applications involving anchor points at foot level and edge-of-structure situations, as commonly found in the construction industry. The fall arrest device features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. Nano-Lok™ Edge has been specifically developed for applications involving foot-level anchor points and sharp edge hazards, as commonly found in the construction industry. It features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. The compact and lightweight construction is practically unnoticeable on the back. It does not restrict the user’s freedom of movement and is ideal as a replacement for a lanyard. Whether your application requires a single- or double-strand configuration, attachment to an overhead anchor point or a direct connection to the safety harness: there are numerous models to choose from for almost any application. Nano-Lok™ locks quickly – a fall is stopped after just a few centimetres, giving you better protection at low heights. Furthermore, the safety rope remains taut at all times to reduce the risk of snagging, tangling and tripping.
3M™ DBI-SALA® Ultra-Lok™ RSQ Höhensicherungsgerät, Edelstahlseil, 15 m, 3504555
Das 3M™ DBI-SALA® Ultra-Lok™ Höhensicherungsgerät (HSG) ist langlebig, leicht und auf Sicherheit, Effizienz und Zuverlässigkeit ausgelegt. Es ist mit synthetischem Seil, Edelstahl- oder verzinktem Stahlseil und Aluminium- oder Thermoplastgehäuse erhältlich. Das 3M™ DBI-SALA® Ultra-Lok™ Höhensicherungsgerät (HSG) RSQ™ ist ein HSG mit zwei Betriebsarten für Absturzsicherungs- und integrierte Rettungssysteme. 3M™ DBI-SALA® Ultra-Lok™ Höhensicherungsgeräte sind in den Konfigurationen HSG, Rettungs-HSG und RSQ™ erhältlich. Das 3M™ DBI-SALA® Ultra-Lok™ Höhensicherungsgerät (HSG) fährt mit dem Benutzer aus und ein, wenn dieser seine Arbeitsaufgabe ausführt. Im Falle eines Sturzes stoppt das Bremssystem mit Geschwindigkeitssensor den Sturz und reduziert die auf den Anwender einwirkenden Kräfte auf ein sicheres Maß. 3M™ DBI-SALA® Ultra-Lok™ Höhensicherungsgeräte sind qualitativ hochwertige und langlebige Systeme, die genau dann Leistung bringen, wenn sie am meisten gebraucht wird.
3M™ DBI-SALA® Nano-Lok™ Edge Fall Arrest Device, Double-strand, Webbing, 2.4 m, 3101440
The 3M™ DBI-SALA® Nano-Lok™ Edge fall arrest device (FAD) has been specifically designed for applications involving anchor points at foot level and edge-of-structure situations, as commonly found in the construction industry. The fall arrest device features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. Nano-Lok™ Edge has been specifically developed for applications involving foot-level anchor points and sharp edge hazards, as commonly found in the construction industry. It features an ergonomic design for ease of use and is ideal for direct connection to most safety harnesses. The compact and lightweight construction is practically unnoticeable on the back. It does not restrict the user’s freedom of movement and is ideal as a replacement for a lanyard. Whether your application requires a single- or double-strand configuration, attachment to an overhead anchor point or a direct connection to the safety harness: there are numerous models to choose from for almost any application. Nano-Lok™ locks quickly – a fall is stopped after just a few centimetres, giving you better protection at low heights. Furthermore, the safety rope remains taut at all times to reduce the risk of snagging, tangling and tripping.
3M™ DBI-SALA® Sealed-Blok™ RSQ™ Rescue Fall Arrest Device, stainless steel rope, 15 m, 3400944
The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) incorporates a patented design that helps protect components such as the motor spring and brake from contaminants such as grease, moisture and dirt. It also features patent-pending technology that reduces retraction speed, thereby limiting the impact of a released lanyard on the fall arrest device and surrounding equipment. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is IP-69K certified and offers protection against dust ingress, high temperatures and high-pressure water for use in extreme environmental conditions. These fall arrest devices are available in HSG, rescue HSG and RSQ™ configurations. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) is indispensable for rescue operations in confined spaces and during entry. It operates quickly and efficiently in the most challenging environments. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is one of the most important components of a rescue system, as it provides the means to bring an injured worker to safety. This fall arrest device is designed so that the safety rope extends and retracts automatically, adapting to the user’s movements. This allows the user to move at a normal pace within a recommended working range. In the event of a fall, the fall arrest device’s internal centrifugal fall arrest system stops the fall and reduces the forces acting on the user to a safe level.
3M™ DBI-SALA® 8 mm permanente horizontale Anschlageinrichtungssysteme, Überkopf-Horizontalschienen-Superextrusionswagen, 4-Rad, 5/8 Zoll Auge, 8521711
Mit Wartungs- und Reparaturteile für Höhensicherungsgeräte (HSG) mit internen Bremssystemen wird sichergestellt, dass Inspektionen der Einheit durch eine kompetente Person erfolgreich bestanden werden. Zu den gängigen Reparaturteilen für HSG gehören: Sperrklinke, Sperrklinkenfeder, Motorfeder, Bremse, Gehäuse, Trommel, Etiketten, Vorrichtungen für Sicherungsseile und verschiedene Komponenten. Beim Einstieg in beengte Räume ist es wichtig, dass die Ausrüstung einwandfrei und schnell funktioniert. Leichte, tragbare Protecta® Aluminium-Dreibeine sind ideal für den Ein- und Ausstieg in beengte Räume durch Mannlöcher. Sie lassen sich leicht zwischen Einsatzorten transportieren und können von einer einzelnen Person aufgestellt werden. In Verbindung mit einer oder zwei mechanischen Vorrichtungen (z. B. Winde oder Höhensicherungsgerät mit Dreifachfunktion) ist das Dreibein sofort einsatzbereit. Unsere Dreibeine sind neben vielen anderen Funktionen und Merkmalen mit feststellbaren Beinen, die einfach mit Sicherungsstiften arretiert werden, mechanische Schnellmontage-Gerätehalterung, Sicherheitskette gegen Bewegen und Verrutschen und rutschfeste Standsohlen an den Füßen ausgestattet.
3M™ DBI-SALA® Sealed-Blok™ fall arrest device, stainless steel cable, 4.5 m, 3400830
The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) incorporates a patented design that helps protect components such as the motor spring and brake from contaminants such as grease, moisture and dirt. It also features patent-pending technology that reduces retraction speed, thereby limiting the impact of a released lanyard on the fall arrest device and surrounding equipment. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is IP-69K certified and offers protection against dust ingress, high temperatures and high-pressure water for use in extreme environmental conditions. These fall arrest devices are available in HSG, rescue HSG and RSQ™ configurations. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device (FAD) is indispensable for rescue operations in confined spaces and during entry. It operates quickly and efficiently in the most challenging environments. The 3M™ DBI-SALA® Sealed-Blok™ fall arrest device is one of the most important components of a rescue system, as it provides the means to bring an injured worker to safety. This fall arrest device is designed so that the safety rope extends and retracts automatically, adapting to the user’s movements. This allows the user to move at a normal pace within a recommended working range. In the event of a fall, the fall arrest device’s internal centrifugal fall arrest system stops the fall and reduces the forces acting on the user to a safe level.
3M™ DBI-SALA® Nano-Lok™ Fall Arrest Device, Single-strand, Webbing, 1.8 m, 3101208
The 3M™ DBI-SALA® Nano-Lok™ fall arrest device is lightweight and compact and can be carried comfortably on the back. It is designed not to get in the way and can also be used as a replacement for a lanyard. The 3M™ DBI-SALA® Nano-Lok™ fall arrest device is compatible with connections at shoulder and foot height and is available in various configurations. It offers versatility for many different industrial applications. The 3M™ DBI-SALA® Nano-Lok™ fall arrest device combines lightweight design with durability and functionality. Comfort and safety were the top priorities during its development to protect you when working at height. Lightweight with many special features. The extremely compact design is practically unnoticeable on your back. It is ideal as a replacement for a standard lanyard and does not hinder your movement. The Nano-Lok’s quick-release automatic brake achieves a fall height of 1.2 m. This provides you with better protection at low heights, with an average arrest force of 400 daN and a maximum arrest force of 600 daN. The constant pre-tension of the safety lanyard reduces the risk of snagging, entanglement and tripping. Thanks to the lightweight quick-connect system, the time required for connecting and disconnecting is reduced. The fall arrestor cover made of nitrile rubber is compact and durable.